If you have a well water supply, then you're probably already aware that there's much more to the water than clean drinking water. A lot of nasty things can get into your water supply if they aren't treated. If you need to know what a whole house water filter needs to do, or if you even need an under-counter mounted filter, this article is for you! Mr. Rooter Plumbing is here to tell you how our plumbing service can meet your whole-house filter needs.
The best whole-house water filter for well water will depend on your specific needs. I’ll discuss a few different types of whole-house filters below, the pros and cons of each type, and how they may or may not work for you.
There are three main types of whole-house filters: sediment filters, carbon block filters, and reverse osmosis (RO) systems. Each has its own pros and cons, so let’s take a look at them individually:
Whole-house water filters are an excellent way to filter your water. If your house is on a well, whole-house filters can be the best solution for filtering and purifying your home’s water supply.
If you have well water, it is not uncommon to find contaminants such as iron, manganese, hydrogen sulfide, and even arsenic in your water. These contaminants can cause health problems and discoloration of your clothing and fixtures. Whole house filters are designed to remove these contaminants from your water supply.
Water filters for well water are a great way to improve the quality of your drinking water. You can also use them to protect your appliances from hard water build-up, which can reduce their efficiency and lifespan.
A whole house filter will help you with both. Whole house filters are installed at the main water supply line, so they filter all the water coming into your home. This means that all your faucets, showers, toilets, washing machines, and dishwashers will be protected against hard water scale and sediment buildup.
Your appliance's or dispenser's flow rate is important because it determines how quickly water will be filtered through the system and back out into the sink. However, it can be difficult to determine exactly what that flow rate is without measuring it yourself.
When using water from a well, it’s important to know how it is purified before purchasing a whole-house water filter. There are many different purification methods, including reverse osmosis, distillation, deionization, and carbon filtration.
The type of purification needed depends on the quality of your water. If you have hard water, there is a high presence of minerals such as calcium or magnesium in your water supply. You may also notice small particles of sediment in your water supply. These two issues can damage equipment and appliances that use water.
If you have well water, it’s important to consider the type of purification method needed before purchasing a whole house water filter system.
Reverse osmosis (RO) is a process that uses pressure to force water through a semipermeable membrane that retains most of the contaminants but allows water molecules to pass through. This process is used in many home water filtration and commercial applications today.
The process works by applying pressure to one side of a permeable membrane and allowing pure water to pass through while blocking larger particles from passing through the membrane's pores. The pressure forces all contaminants in the water to be pushed against the opposite side of the membrane, where they are collected for disposal or recycling.
A reverse osmosis system typically consists of an intake filter, pre-filter, and RO system. The intake filter removes larger particles like sediment, dirt, and rust from your well water supply before it enters the RO system. The pre-filter is usually just a screen that further reduces particulates before entering your RO system. Finally, your RO system will remove any remaining particles from your well water supply, leaving you with clean drinking water without any minerals or chemicals added back in!
Carbon filtering is the most common way to treat well water. This treatment uses activated carbon to remove contaminants from your water supply. Activated carbon absorbs chemicals and other impurities as they pass through it. Water flows through the carbon bed, removing these impurities and leaving clean water behind. Carbon filters have been used for decades and are extremely effective at removing contaminants like chlorine, VOCs, and pesticides.
What’s nice about carbon filters is that they don’t require electricity or plumbing work — just hook up the hose and turn on your faucet! They also come in all sizes, so you can find one that fits your needs perfectly.
A UV filter is an excellent choice for removing bacteria and other microbes from well water because it targets the DNA of microorganisms and destroys it with a burst of ultraviolet light. This technology has been used for decades and is considered one of the most reliable methods for disinfecting drinking water.
If your well water is hard, consider installing a water softener. Water softeners use salt to remove minerals from the water. This can help prevent scale buildup on pipes and appliances, making the water feel softer on your skin and hair.
So, how do you find the best whole-house water filter for your well water? Start by asking a dependable plumber about the different filters available for your home. It's also important to understand how much flow is needed from your filter system for your appliances before deciding which filter is best for your home. When you are determined to find the right whole-house water filter for your well water, there are some important factors to consider before committing to a big purchase. With the help of Mr. Rooter Plumbing, you can figure out what you want in a whole-house water filter unit.